5°, it is recommended to prefer inexpensive elastic pin coupling Shaft, when the radial deviation of the two shafts is not more than 0. Couplings containing non-metallic components such as rubber are prone to aging and deterioration under the action of high temperature and corrosive media, so they are not suitable for use in this environment., rather than using a biased slider coupling.15mm and the angular deviation is not more than 0.
Regarding high-speed transmission, couplings with high balance accuracy should be selected, such as diaphragm couplings, gear couplings, etc.5°, the universal coupling should be considered. If it is difficult to align and the rigidity of the shaft is poor, a coupling with the ability to compensate offset can be used. Regarding non-standard mechanical equipment that does not exceed tens of kilowatts and Wholesale CV Axle manufacturers has little impact on general roads, when the radial deviation of the two shafts is not more than 0. Regarding heavy-duty transmission with high power and no impact, gear couplings are preferred.
If high working reliability of the coupling is required, couplings made of metal components that do not require smoothness should be selected, such as diaphragm elastic couplings, roller chain couplings, etc.15mm and the angular deviation is not more than 1°, it is recommended to prefer the cheap plum-shaped elastic coupling; only when the radial deviation and angular deviation of the two shafts When the shift is larger, consider choosing gear couplings and tire couplings with better compensation function and more expensive; when the angular deviation is not more than 1.
Examples of coupling applications! Regarding the low-speed shaft with stable load, if the two shafts are aligned accurately and the shaft has good rigidity, a rigid coupling can be used. If the two shafts form a certain angle, a universal coupling can be used. Couplings that require smoothness, such as gear couplings, slider couplings, etc., may pollute the environment and should not be used in occasions that require a particularly clean environment.
Regarding heavy-duty transmissions with severe impact loads at the same time, it is recommended that couplings with high elasticity such as rubber metal ring couplings, tire couplings or reed couplings should be preferred. For relative displacement and harsh working environment, roller chain couplings can be used
